Array design starts with the roof — and the engine hands you the roof as data. Usable planes, orientation and tilt per facet, obstruction-aware geometry, all before the site survey van leaves the lot.
One address in — the numbers a solar bid actually runs on, out. All from the same aerial + AI measurement core.
Every facet extracted as its own plane with area in sq ft — see instantly which faces can carry panels.
Orientation of each roof plane, so south-, east- and west-facing production math starts at the address, not the site visit.
Facet pitch converted to panel tilt — feed your production modeling with the real roof, not a guess.
Clean facet polygons and roof outline geometry, ready for your shading and layout tooling.
Vents, pipes and roof furniture counted from imagery — the stuff that eats array capacity shows up in the report.
Building footprint and perimeter for ground-mount screening, setbacks, and interconnection paperwork.
The pitch diagram page from a live report — per-facet pitch on the annotated aerial with the table your design team needs for tilt and production modeling.
Type any US address — the engine finds the structure in a 130M+ building footprint database.
Aerial imagery is measured, classified and confidence-scored in the cloud. No ladder, no tape, no drive time.
Branded PDF + data payload with the solar numbers on this page — ready to price and send.
Type an address. Twenty seconds later you're holding the numbers.
The Measure Center is the measurement-technology division of the 9 Figure Roofer national network — the same engine that powers every 9FR roof price, claim, and installer report.
